|
|
|
|
|
|
|
Corvette 1992, 1993 Corvette (mid year change by GM) Corvette 1994-1996, Camaro 1993, Camaro 1994-1997, Firebird 1993, Firebird 1994-1997, 1994-1996 Impala SS Caprice Roadmaster Fleetwood... LT1 Polished or Brushed Stainless Steel FUEL RAIL COVERS. Includes both Driver & Passenger sides. Has a notch for air hose to valve cover on the Passenger Side (Except 1993-1996 Corvette)Does NOT have notches for air hose clamps that are on top of the Manifold for Camaro (F Body) and Impala (B Bodies).. the hose can remain, but for esthetics, it's best to remove plastic clamps. Install using the existing Fuel Rail bolts (2 on each side). 4 Plastic Chrome Caps included that install with Automotive Grade 2 Sided Tape. Note that since Fuel Rail Covers did not come standard on most of these cars (except Corvette(), there are wires, wire clamps and other hoses/clamps and/or brackets that you will have to remove to get the wires down low enough for these fuel rail covers. Note that 'tranplanted Engines into Hod Rods- it is imperative you know what year/make/model car it came out of or the bolt pattern could be wrong and will not fit; also note that transplanted engines many times have the entire engine showing (vs. Corvette/Camaro where a poriton of the engine is under the windshield cowl) and the Driver Side is made much shorter than the passenger side because these engines have things in the way on that side- which may not be the case with a 'transplanted' engine. These are built to order and therefore no returns.
